It is currently Fri Dec 09, 2016 8:11 pm

Post new topic Reply to topic  [ 1 post ] 
Rotax Rule Updates 
Author Message

Joined: Tue Oct 16, 2007 9:06 pm
Posts: 140
Location: Long Beach
Post Rotax Rule Updates
Here are some rule updates that will be included in the 2010 Rotax rule book:

Effective Immediately;

Rule 11.6

Minimum length of ignition wire ( high tension wire) is 210 mm from outlet of cable at ignition coil to outlet of cable at spark plug connector ( = the visible length of wire)
Ignition coil must be in working condition (to be tested in case of doubt)

The following additions are being made to the 2010 USRMC Tech Supplementary Regulations

Section 1
• Technical Inspectors may use any method necessary to determine compliance of Rotax Engines or components.

Section 3.0 Chassis
• Seat Mounts..All Classes – Any seat strut/stay attached to the chassis must be attached at both ends, bolts and nuts must be in a condition of compression at all times.

Section 15.1 Carburetor
• All jets must be screwed tight, this includes “innerâ€

Wed Feb 10, 2010 1:33 pm
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

Who is online

Users browsing this forum: No registered users and 0 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore.